1 / 3
EPROM Programmer PX1000 / PX500 Selector Switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Selector switch replacement for an PX1000/PX500 EPROM Programmer. Adjustment likely required for screw hole.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 35
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Modeled a selector switch for an old PX1000 / PX500 EPROM programmer. Screw hole diameter can be drilled out or remodeled to fit your own use. I recommend printing with the handle facing the bed, with tree supports.
Used the following to print this:
Nozzle Size: 0.4mm
Layer Height: 0.20mm
Infill 40% (You could go lower with this, I chose 40% since my coworkers broke the last switch.)