Rotating beacon for RC dozer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added a rotating beacon on top of the Dozer.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 45
- Makes
- 0
- Views
- 558
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I installed a rotating beacon on the RC Dozer. To do this, I added a hidden cable channel to the upper body (23). Created a flat surface on the roof, where I glued the beacon on, wires through the hole.
I found the beacon on AliExpress:
Multi-function Flashing Rotating LED Light Bar Alarming Lamp for 1/14 Tamiya 1/10 RC Car Engineering Truck Upgrade Parts
Connect the red wire to LT2, and the brown wire to any GND-Pin. I isolated the yellow wire, for not using it.
To link the rotating beacon with the headlights, two additional lines need to be added to the Arduino sketch (see photo).
Only the relevant section is shown here, you find the complete sketch at ProfessorBoots Workshop Pass:
https://professorboots.com/products/professorboots-workshop-pass