1 / 4
Tesla P100 shell
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Printing Instructions (PLA):
Main Housing: 30% infill, enable supports (minimal/touching buildplate only).
Other Parts: 15% infill, no supports.
Layer Height: 0.2mm (recommended).
Wall Count: 3 (recommended).
Fan Specifications:
Size: 80mm x 80mm x 10mm (厚).
Mounting Hole Spacing: 72mm (center-to-center, standard for 80mm fans).
Mounting Screws: M3 x 6mm or 8mm (length).
Tesla P100三风散热，世界安静了许多_哔哩哔哩_bilibili
Follow us！Thank 亦！