ProAcryl rack for Skadis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skadis compatible dense rack to hold ProAcryl paints
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 1
- Views
- 113
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model densely packs 25 ProAcryl paints (or similar sized bottles) in a 160x160mm Skadis rack. The picture shows a 2x3 grid of racks capable of holding 150 bottles.
It used the universal hook to attach to the wall.
To allow inserting the paints bottom's up, there are custom attachments for the hooks. These need to be glued (I print in PLA and use SuperGlue). There are placement guides on the back to aid alignment. Since each attachment is unique, I added arrows on the outside of each pointing to the corner which it belongs. As long as the arrows are a) on the outside, b) pointing towards the main plate, and c) pointing towards the corner you should be good.