1 / 4
Dice Tower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.53 – €10.43 net (excluding VAT)
For file: Compact_Dice_tower_0.2mm_PLA_MINI_10h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.48 excluding VAT (range midpoint).
- Weight reported by the author
- 90 g
- Print time reported by the author
- 10.85 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Print in Place No Support Compact Folding Dice Tower Box
- Rating
- 4.837 / 5
- Likes
- 722
- Downloads
- 4,108
- Makes
- 53
- Views
- 23,404
- Reviews
- 49
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print in Place No Support Compact Folding Dice Tower Box
Be advised, this model is not suitable for large D&D dice, you should instead print the bigger and easier to print Dice Tower if you plan to use it with D&D dice
Compact Folding Dice Tower and Box
- Print in Place
- No Support
- No Brim
Print Instructions
- It is a tight fit, make sure your printer is well calibrated
- careful there is one very long bridge
- Print the parts in PLA
- Nozzle diameter: 0.4 mm
- Layer height: 0.2 mm
- Perimeters: 2
- Fuzzy Skin
- Outside walls
- Tickness: 0.2 mm
- Distance: 0.2 mm