Sliding Cupboard Door Bottom Track
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corrosion-resistant sliding cupboard door bottom track. Great for salty wet locations (e.g. front halls).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
The metal door track that this print replaces was always prone to corrosion. Replace it with this print in ABS-FR. The tongue of the door snaps into the track.
The FreeCAD file CAD can be modified (spreadsheet in the model) to change the print to the desired lengths. Otherwise, use the Front_Hall_Cupboard_Bottom_Track-250mm-noholes.step and scale in the length to the desired size.
Holes can also be unsuppressed in the CAD. Otherwise, match drill and tap.
To bolt down on a tiled floor, used a Aluminum Flat Bar 6061 T6511 0.125 X 0.500bar. which is bolted to the floor using stainless steel countersink fasteners, and then bolted down the print using 3mm stainless steel socket head cap screws. Aluminum requires drilled and tapped holes for this print.
Recommend printing the parts first before marking off the holes in the aluminum bar to ensure matched holes.
Print is ABS-FR(flame-retardant) at 100% infill.