Scott Keeper 2 helmet - Goggle Strap Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement backplate and clip for Scott Keeper 2 helmets. Designed for durability and minimal supports.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement I designed for the backplate that holds the goggle strap in place on the Scott Keeper 2 helmet. While it was modeled specifically for this helmet, it might be compatible with other Scott models that use a similar attachment system, though I have not been able to test that myself. It serves as a straightforward fix if your original plastic clip has snapped or gone missing.
The design consists of the outer plate and a small clip that secures it from the inside of the helmet. I have made this clip quite stiff on purpose to ensure that the strap remains secure during use. When you are assembling the parts, it is important to press the clip straight down on to the pin. Please avoid pushing it in at an angle, as the tension required for a tight fit means the parts could break if they are not aligned correctly during installation.
For the best result, I recommend using the included .3mf file. I have already configured this file to optimize the printing orientation for maximum strength while using as little support material as possible.