Cindergale — Ash-Kite Glider (Figurine + Wall Plaque Set)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A silent glider who rides updrafts off hot stone. Includes a full-body figurine and matching framed wall plaque.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 27
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Full Description
Cindergale rides the updrafts that roll off hot stone, gliding on a collapsible ash-kite and landing without a sound. At her hip hang wind-chimes made from spent shell-casings—signals only her crew understands. When storms rise, she’s already moving, tracing safe paths through chaos like a dancer reading music.
This upload includes two matching models:
Full-body figurine (dynamic landing pose)
Framed wall plaque (bas-relief version for easy display)
Designed to look strong in greyscale / single-colour prints with bold shapes and clean surfaces.
What’s Included
1× Cindergale Full-Body Figurine (STL/3MF)
1× Cindergale Wall Plaque (STL/3MF)
Recommended Print Settings (Bambu A1 / FDM)
Figurine
Material: PLA / Matte PLA
Nozzle: 0.4mm (detail) or 0.6mm (speed)
Layer height: 0.16mm (0.4) / 0.24mm (0.6)
Walls: 3
Infill: 10–12% Gyroid
Supports: Tree supports ON (touching build plate)
Brim: Optional if your bed adhesion is iffy
Wall Plaque
Material: PLA / Matte PLA
Layer height: 0.20–0.24mm
Infill: 10–15%
Supports: Usually OFF (depending on your frame/chamfer)
Print face-up for the cleanest front detail
Tips
Matte PLA gives the best “straight off the bed” finish.
If you want extra strength, print the figurine at 110–120%.