Stranger Things Hellfire Club Coasters - MMU/AMS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A couple coaster designs with the Hellfire Club on one side, and Stranger Things on the other.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 65
- Makes
- 1
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Just a few designs for a full-clour MMU implementation of the Stranger Things / Hellfire Club coasters. Others out there have the cut-outs which I'm not a fan of, I just want a nice flat plate without crannies to wash out.
These need a 4-colour MMU to work, using your choice of White, Black, Yellow and Red in slots 1-4 respectively
The printed sides are 0.4mm deep, so printing at 0.2mm will give 2 layers each for the top and bottom designs, often plenty to resolve opacity issues. My red is still a bit transluscent and gives a cool light effect when held to a lamp.
Print whichever side you want to be the nicest down using a textured plate, but elephant foot can squeeze out the thinner lines. I've found best results when the Hellfire Club side is up.
I recommend using the 3MF file as it's all set up for colours and labels for parts, while the STL you'll need to sort out and colour each part from scratch, and there are a lot of bits! :D