Little Boy A
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MakerUnit’s Little Boy case shrunk for APU builds.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to build a Ryzen 8700g based Bazzite box, but my pico PSU died.
I had made a previous build in a Little Boy case so I decided to tweak the standard case to remove some stuff I didn’t need and fix compatibility with the hardware I had on hand.
I didn’t need a dedicated GPU so I removed the hole for that and shrunk the case height by 25 mm. It also turned out that my old Seasonic SFX power supply is a three point mount. So I added two additional mounting holes on the back panel to allow similar power supplies to mount in either a fan out or fan in orientation. I also increased the whole size for the power switch to 16 mm because that’s what I had on hand.
The top and bottom are the same size as default so you can use other mods or the default top if you want to.