1 / 3
Motorola Minitor VI (6) pager clip adapter — image 1
1 / 3

Motorola Minitor VI (6) pager clip adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replaces original clip with a adapter that fits Utili clip or Tek lok. Includes adapter with slot for MiLi tracker.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
165
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

This came about because I've got a bad habit of misplacing my pager, whenever I'd clip it to a pocket or strap the stock clip would come lose and it would fall off. First goal was to incorporate a MiLi tracker to the pager so I could find it when I lose it.

About half way through I realized I could just adapt the pager to use knock off Utili Clips which hold well and are readily sourced from aliexpress. Finally once I was happy with the design I decided to also mount my knob shield to the adapter instead of using a drop of glue to attach it to the pager. 

Included are 3 files, one adapter with MiLi tracker slot, one adapter with no tracker slot, and the modified knob shield that screws to the adapters. 

Both adapters latch into the stock charging cradle, the one with the tracker attaches to the Utili clip with 1 screw, the adapter with no tracker has 3 holes at .75IN spacing and should be compatible with most common holster hardware. 

1 M3 heatset insert and M3 screw are used as a set screw to prevent the adapters from sliding out once mounted on the pager. 2 more M3 heatset inserts and M3 screws are used to mount the Knob shield to the adapter, this allows the knob shield to be a different material or colour than the adapter. 

See photos for suggested printing orientation of the adapter and knob shield. Adapter will require a little bit of support. Might also require some light sanding to fit to your pager. Set screw hole has a .2mm layer to help your printer bridge the overhang this layer can be poked or drilled out once printed. 

I believe the MiLi tracker is slightly larger than a Apple airtag, but I use android and don't have any airtags. If you would like a version that fits a airtag let me know and send me the dimensions of one. 

If you don't have a compatible clip, either of these printable options should work with this:

Tags