1 / 2
Monoprice Mini Delta Extruder Hose Guide Screw Mount — image 1
1 / 2

Monoprice Mini Delta Extruder Hose Guide Screw Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

V3 - Fixes the placement of the screw. it was offset previously and caused issues. From original On the Monoprice Mini…

Rating
0 / 5
Likes
3
Downloads
13
Makes
0
Views
147
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

V3 - Fixes the placement of the screw. it was offset previously and caused issues.

From original

On the Monoprice Mini Delta the feed hose going to the extruder tends to get caught in the motors on occasion. This causes some very bad noises and prevents the extruder from reaching its home position at the end of the print. This clip helps guide the hose back into the proper position to prevent this from happening.

The original snapped into place and it wasn't the easiest thing in the world. There's a screw on the right side, so let's use it!

This is better than the version I made from scratch, which sometimes missed the cable bundle.

Category: 3D Printer Accessories

Tags