Monoprice Select Mini Delta Cable Keeper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
After disconnecting the cable bundle and moving the ptfe tube, the cable bundle/ptfe tube would get pinched between the control arm and the frame during a homing sequence causing the motor to grind and skip.
I made this to keep the bundle from getting below the frame and getting pinched.
Print Settings
Printer Brand:
DAGOMA
Printer:
Neva
Rafts:
No
Supports:
No
Resolution:
.02 mm
Infill:
17%
Notes:
Uses the existing frame screw to mount. Make sure you get a good bite with the screw or the model will pop off when there's a little pressure applied. A slightly longer screw wouldn't hurt, but I was able to mount it with the stock screw.
Category: 3D Printer Accessories