110mm mechanical iris
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print is for a mechanical iris with a open ID of 110mm and a overall OD of 180mm minus mounting lugs.
- Rating
- 4.75 / 5
- Likes
- 115
- Downloads
- 459
- Makes
- 4
- Views
- 4,872
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This print is for a mechanical iris with a open ID of 110mm and a overall OD of 180mm minus mounting lugs. Files include cad drawings in FreeCad 0.19, STLs, PursaSlicer 2.4.1 3mf files, and pre sliced gcode for a i3 MK3.
If you re slice note the petals were designed for a 0.1mm layer height and a 0.4mm nozzle.
All the other parts can be printed at a 0.2mm layer height and 0.4mm nozzle.
Infill was 15% for all parts and no supports.
The pegs are set up to accept a #12 (imperial) nut. Note they like to break off if you force things. I used a die to partial thread the pegs to use normal nuts. A “speed nut” would be a better choice for this assembly but did not have any on hand.
When stacking the petals I got better results when stacked as shown.