Formbot3d XplorerRapido UHF Hotend Ducts and Ooze Arm Mods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ducts and ooze arm to allow for the longer hot end of the Phaetus Rapido on the Formbot Xplorer IDEX/IQEX Printer
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a collection of all of the mods I did to make the rapido hot end 2f UHF work on the xplorer. First is the modified duct. This rides pretty low to the bed with only a couple of mm clearance between the bottom of the duct and the nozzle. I had to actually reduce my airflow as it's a little to effective and it was impacting layer adhesion because I brought it closer to the nozzle and reduced the opening a lil bit.
I've included a model that works with the stock inductive probe as well as a one that has holes you can use to install standoffs for a beacon or carto probe once you heat press typical m3 inserts . The duct with alt in the name is good for probeless tools as well as using beacon/carto style probes with a standoff. All that's needed is to press a typical 3mm screw heat insert into the two holes under the front fan.
The next order of business is the ooze arm needs to be extended ~7-8mm to allow for the longer hotend to park. I've had a few of these parts manufactured for me and had a few extras made to share with the community. I've posted them up on ebay. Once they are gone, they are gone. If you'd like to cut some yourself or try printing them, I've included the step file so you can DIY or source your own as well. I tried printing them before I settled on having them made. It was too floppy to really be effective.