1 / 2
Charger / Generic Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angled stand to hold a charger or other device
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 144
- Makes
- 2
- Views
- 715
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Quick stand I designed to hold my LiPo charger at 45 degrees to make it easier to use.
Two versions of the cross brace are included, one with 0.15mm clearance and one with 0.30mm clearance. For a well calibrated printer the 0.15mm version should be sufficient. If it is a little loose a drop of hot glue will hold it together.
The cross braces and sides are identical, just print two of each.
I have included a dimensioned drawing of the stand so you can check its the right size for your charger.
Changelog
- 28/03/2022 - Uploaded to Prusaprinters.org
- 02/11/2020 - Changed the cross braces to no longer require supports
- 01/11/2020 - Initial upload