Gaggia Classic Pro Flush Adapter for lower drip trays
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for the flush tube for use with the lower drip tray. Prevents splashing
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 99
- Makes
- 3
- Views
- 336
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The internal structure ensures that the water no longer shoots out forcefully, so it also works if the hole in the drip tray is not directly below the adapter/tube.
I recommend printing with PETG or another material that can withstand heat better than PLA
Print standing without support
When assembling, it is normal if a little more force is required. The pipe cannot be pushed in too far, as it is stopped at the correct position by a narrowing.
A sealing ring (O-ring 4-6 mm) can be inserted into the adapter itself, but it also works great without.