1 / 1
Emtech ZM-2 ATU Tuner Cover/Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cover and stand for the Emtech ZM-2 ATU tuner.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a basic cover for the Emtech ZM-2 tuner to protect the knobs and switches when in a pack and can also be used as a stand. Depending on the orientation of the cover either 30 or 60 degrees, use a velcro strap or rubber band to hold the cover in place when protecting the knobs and switches. Simple print, no supports or brim should be needed. The one pictured is printed out of CF PETG for durability, I would recommend to use at least PETG for impact resistance.