Passive filament dryer / Filamenttrockner passiv
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The filament dryer is used to store filament spools. The inserted hygrometer displays the current humidity level.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
(English description below)
Der Filamenttrocker dient zur Lagerung von Filamentspulen. Er wird nach dem Befüllen mit Silicagel in das Kernloch der Filamentspule eingelegt. Das Hygrometer zeigt den aktuellen Feuchtigkeitsgrad in der Box oder Verpackung an. Der Filamenttrockner hat einen Durchmesser von 50 mm und eine Höhe von 65 mm, sodass er mit handelsüblichen Filementspulen kompatibel ist. Für Spulen mit 74 mm Innendurchmesser gewährleistet ein Adapterring den Halt des Trockners.
Der Filamenttrockner besteht aus drei Teilen: dem Hygrometerring (oben) und dem Silicakäfig (unten). Bei Bedarf kann in den Hygrometerring ein Schutzgitter eingefügt werden, um zu vermeiden, dass die Silicakugeln aus dem Käfig fallen. Ein separater Trichter erleichtert das Einfüllen des Silicagels.
In die Öffnung am oberen Ende des Hygrometerrings kann ein rundes Hygrometer mit einem Durchmesser von 45 mm eingefügt werden. Dieses wird durch zwei Haltezungen im Gehäuse fixiert. Geeignet ist beispielsweise diese Ausführung:
https://www.amazon.de/dp/B0D8YL81CW?ref=ppx_yo2ov_dt_b_fed_asin_title
Damit das Display des Hygrometers nicht durch das Absaugventil des Vakuumbeutels beschädigt wird, sollte das Ventil auf der Rückseite des Silicakäfigs platziert werden.
Ich habe die Trockner mit PLA beziehungsweise PETG gedruckt.
___________________
(English)
The filament dryer is used to store filament spools. After filling it with silica gel, it is inserted into the core hole of the filament spool. The hygrometer displays the current humidity level in the box or packaging. The filament dryer has a diameter of 50 mm and a height of 65 mm, making it compatible with most filament spools. For spools with an inner diameter of 74 mm, an adapter ring ensures that the dryer stays in place.
The filament dryer consists of three parts: the hygrometer ring (top) and the silica cage (bottom). If necessary, a protective grid can be inserted into the hygrometer ring to prevent the silica balls from escaping the cage. A separate funnel makes it easier to fill in the silica gel.
A round hygrometer with a diameter of 45 mm can be inserted into the opening at the top of the hygrometer ring. This is held in place by two retaining tabs on the housing. This model, for example, is suitable:
https://www.amazon.de/dp/B0D8YL81CW?ref=ppx_yo2ov_dt_b_fed_asin_title
To prevent the hygrometer display from being damaged by the vacuum bag's suction valve, the valve should be placed on the back of the silica cage.
I printed the dryers using PLA and PETG, respectively.