Simucube 2 Sport Meanwell PSU bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this to mount the ~95mm wide Meanwell PSU that came with my Simucube 2 Sport to my 8020 extrusion Sim Rig
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- GNU General Public License v3.0
I needed a suitable bracket to mount the power supply for my Simcube 2 Sport wheelbase to the 8020 extrusion that makes up my SimRig. I found another model here, but I think that's for a larger PSU and it did not fit my use case. I threw this together in Autodesk and printed it in ABS on my Voron Trident. Should print on smaller printers just fine as the exterior width is around 105mm. Have avoided fillets on the bottom edge and opted for a chamfer to work better with 3D printing.
Printed in eSun ABS+, 0.2mm layer height, 40% gyroid infill, 3 walls, 0.6mm nozzle, no supports