1 / 2
Voron 2.4 350mm Onn Camera Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount was made for the V2.4 350mm. Does require disassembly of the original camera mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This camera mount was designed around the Onn Webcam. It will require disassembly of the original camera mount. Remove the rubber pad and you will find the screws to take apart. This mount will use the screw that directly mount the camera on the original mount so don't misplace that.
Other parts you will need with be 2xM5 T-Nuts or Roll In's and 2xM5 screws to hold in place.
I did upload STEP file if you have a small printer and want to adjust the angle to fit your needs