1 / 1
O-ring for Core One Advanced Filtration Retrofit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The required O-ring for the DIY Advanced Filtration, printable in TPU
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 32
- Makes
- 2
- Views
- 224
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a 3.5 inch x 2.5 mm O-ring for the DIY / retrofit advanced filtration. It can be easily printed solid in TPU with the flat side facing down. To install, make sure that the flat side doesn't face the blower fan. Then just proceed by screwing the fan down using either M4 bolts straight into the plastic or M3 bolts and threaded inserts.
Happy printing!