Renault Zoe R90 2017 Cable Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Cable hook for the loading cable of the Renault Zoe.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 116
- Makes
- 5
- Views
- 1,082
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
I liked the original design very much, but the hook was to small and so the upper side of the holder did not get in contact with the bore of the wall of my Zoe R90 2017. So all the weight of the cable lays on the lip of the wall of the Zoe, which has been bended over time.
That’s why I decided to redesign the hook to have a more secure connection to the wall of the Zoe.
For the Assembly you will need a M3X20 Conehead screw an a M3 nut.
After printing, the M3 nut is assembled in the holder. Then the holder have to be assembled on the lip of the wall of the car. After that, the hook have to be assembled in the hole and the screw have to inserted an fastened.
Please use a temperature resistant material for the print. PETG school do the job, but it would be better to have a material like Extrudr GrennTec Pro.
Only the Hook needs support (only touching build plate). The holder could be printed without support, but you have to remove some bridging material, wich closes the hole for the screew.