oled128x64_096-esp8266-box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple box for Arduino ESP 8266 Wemos D1 mini pro and OLED 128x64 0.96'' display
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
3D printable box for Wemos ESP8266 D1 mini and 128x64 0.96'' OLED display for
!!! Be careful !!! This model IS NOT for this display https://dratek.cz/arduino-platforma/122155-iic-i2c-oled-displej-0-96-128x64-modry.html
Check the distance between screw holes on your display first. (Comparing pinout may help. Compatible display has pins in this order: GND | VCC | SCL | SDA)
How-to:
Grab the model
Slice it. I choose settings: 0.15mm, structural, 25% fill, fuzzy cover. Tested on white PETG, Prusament. No supports needed.
The only additional items you need is 4x M2x4 screws for display fitting. Alternatively you can glue the display with hot glue.
Freecad project is available at my github https://github.com/bero158/box-oled128x64_096-esp8266.git