Rolohaun Delta Flyer Refit BTT HDMI5 1.2 Top Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rolohaun Delta Flyer Refit BTT HDMI5 1.2 Top Mount
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I modified the original mount created by NoobEnginer on Thingiverse to fit the 1.2 version of the BTT HDMI5 screen, as well as changed the base to shorten it and remove the arm and swivel feature.
I also modfied Kanrog's modular top by adding mounting holes. I chose the modular top because the large slots on the rear part are necessary to route the cables. Shorter cables would be a good idea. The rear section and base components from the original model should be used.
The base mounts to the top with heatset inserts, and I mounted the screen to the base with an M3 screw and wingnut so I can adjust the tilt. The screen mounts in the case with screws from the back.