2.5" HDD/SSD + Pendrive + SD Card holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to create a holder, where I can organize most of the things I use, or I know it can disappear quite easily.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder, where you can put your SSDs/HDDs, pendrives and also your SD cards. It can hold up to 10 pendrives, 12 HDDs/SSDs and 9 SD Cards.
The SSDs are stored a bit loosely, but the HDDs are held tightly. For the pendrives, the first print way quite tight so I modified the values by .2mms on the left and right side and by 0.1 on the top and bottom side. The base sizes were the basic USB sizes which are 12mm x 4.5mm.
Dimensions:
SDD/HDD holders: 70.2mm x 9mm x 10mm (WxHxD)
Pendrive holders: 12.4mm x 4.7mm x 10mm (WxHxD)
SD Card holders: 24.2mm x 2.3mm x 18mm (WxHxD)
Filament:
SUNLU PETG filament.