1 / 4
The Jubel - a feline hock injury brace — image 1
1 / 4

The Jubel - a feline hock injury brace

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Feline foot brace for cats with a hock injury which cannot heal - dedicated to a cat named Jubel

Rating
0 / 5
Likes
3
Downloads
9
Makes
0
Views
255
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The goal of this model was to help a cat named Jubel who I work with (veterinary clinic & as their pet sitter) who suffered an unfortunate accident to her left hind foot and has resulted in an exposed tissue/nerve wound underneath her hock.

Due to the fact that Jubel is an older and overweight feline, this wound would not heal with constant impact/pressure from her walking on her hocks. 

I therefore designed this brace to try and raise her heel off the ground to see if this will help not only with her pain, but encourage the wound to heal.*

During the trial and testing phase with Jubel, I determined that cats are not a fan of having something directly under their foot (toe beans). This therefore resulted in the models length being designed to allow the cats foot to sit at the front and not on the brace to imitate natural placement and positioning of a cats hind legs. 

There is an incline from the front of the model to the back (along the metatarsus) where it drops off to allow the 'heel' section (Tarsus) to have no pressure on it (roughly 40mm long). This is meant to imitate the natural angle a cat would walk in. The height of the incline is roughly 9mm as I didn't want to make the incline too high to destabilise Jubel or unbalance her.

The base of the brace also has a 'high heel' function as Jubel was not keen on using her toes and foot for walking anymore (after a long time being limited to walking directly on her hocks). Therefore, this heel is meant to encourage her to use her toes by placing her further into the natural position of natural walking. the height of the heel is roughly 25mm.

To secure this model to Jubel, the model includes slots for velcro straps (width 26mm) to be used to hold and secure the cats foot to the brace. One strap goes through the base of the brace (as going underneath proved too slipperly for Jubel), one around the ankle/hock and the other at the top of the brace as another securement.

This model is not 'perfect', but I am proud of how far I have come to create something that may not only help Jubel, but other cats with similar wounds/issues.

I have further modifications still to do to improve it - so stay tuned!

Size:

Roughly 85mm long by 75mm high. 

Printer:

Bambu P1S

Printer Location:

FabLab at Windale Library NSW Australia - https://library.lakemac.com.au/Explore/Fab-Lab

Printing Instructions:

  • Print with TPU (softer and flexible for comfort of the cat) and use PLA supports (as using 

  • Print flat to reduce the need for supports on the heel base

  • Infill - 5%

  • Wall Loops - 2

  • Infill pattern - I trialed a few different options but you want to find a happy medium between strength and softness/flexibility. I used Honeycomb for earlier iterations. 

Design software:

Blender

*This model has not undergone extensive testing, validation or medical review for medical use. This model may not be approved for medical use and the creator does not claim that it is. Discretion is advised and print at your own risk. By choosing to print, modify or use this model, you accept full responsibility for any and all outcomes. 

Tags