1 / 2
Painters tape lint roller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handle to hold a 50mm wide (2") painters tape. (inner diameter ± 75mm or 3 inch).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
A handle to hold a 50mm or 2" wide painters tape. (inner diameter ± 75mm or 3 inch).
Print the handle lying on the side.
Assembly: some force is required to push the ends of the handle together to snap the holder on. If to difficult apply a bit of heat.
To install roll: flex the ends of the holder a bit and use a turning motion to force the roll on.
To use: Just lift the tape of the roll double it back on itself until your fully round, and stick it to itself again. now roll until it no longer sticks, repeat