1 / 3
Cork Gasket for Exhaust Creality Falcon2 Pro — image 1
1 / 3

Cork Gasket for Exhaust Creality Falcon2 Pro

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

To be cut on Laser Cutter / Engraver. Cork Gasket to reduce the Smoke/Fumes leak from OEM enclosure

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
32
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I do not have a window close to my Engraver so needed to use Inline fan and other things to reduce the smoke leaking to my hose while engraving

one additional point of failure has been the junction between the OEM exhaust or even the 3dprinted elbow I am using to on my negative pressure setting to move smoke out of the enclosure. I needed to have a Gasket. 

I took advantage of the 3dPrintable file for the elbow I use (https://www.printables.com/model/1562201-90-degree-elbow-3-to-4-creality-falcon2-pro-4060), and ask an AI to help me create a gasket to it. this is the result.

You see 2 versions, one with narrow borders between the whole and the external boundary, and one with wider border (this is the one I am using) to help me block correctly the possible smoke leaks.

I printed this on 4mm Cork. I have a Falcon2Pro 40w, so I use 60% Power 1200 speed and 3 passes to cut this and not create fire while cutting

Probably TPU printed would be a better gasket as cork over time get compressed, so you may need to tighten the screws every now and then, or to replace the gasket, but this is a very fast solution that is working for me

NOTE: On the pictures here you do not see a square gasket just because I cut it from a round coaster. but the design is done to have a square gasket just as the union of the OEM exhaust that comes with the Falcon2Pro

Tags