1 / 8
Lashing Strap Reeler / Winder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The reeler enables lashing straps to be rolled up quickly and stored cleanly. Designed to handle straps up to 6m.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 108
- Makes
- 1
- Views
- 1,275
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I recommand to use the newer Version 2:
https://www.printables.com/de/model/158567-lashing-strap-reeler-winder-v2
----------------------------------------------------------------------------------------------------------
No more messing up the lashing straps and fast, clean rolling up. Designed to handle straps up to 25 mm width and 6m length.
Printing/Assambling
- Print the 4 parts (PETG 0,3mm layerheight, 20% infill)
- Put the shaft through the hole in the reel
- click in the crank on the other side of the reel (needs a bit of force)
How to use:
- put the end of the lash into the slot of the reel shaft
- wind it 2-3 times up
- place the drum over the reel, place the belt in the drum slot
- Hold the drum and turn the reel with the crank