AI3M Nozzle Brush (Klipper macro + instruction)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.42 – €1.73 net (excluding VAT)
For file: AI3M_1h44m_0.20mm_250C_ABS_ENDER3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.58 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.73 hr
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Nozzle Cleaner for AI3M (Klipper macro + instruction)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dmitry made a great model and supplied the Marco code for Klipper. I just made it work for the AI3M bed!
For macro setup, look back at Dmitry post.
Note: You may need to take off the bed to get it on.
[gcode_macro WIPE]
description: Wipe nozzle on silicone comb (center-based + zigzag)Comb parameters
variable_comb_x: 100. ; X center of the comb
variable_comb_y: 223. ; Y center of the comb
variable_comb_z: 4.00 ; Z when touching the comb
General parameters
variable_comb_z_lift: 5.0 ; Nozzle lift before/after wiping
variable_comb_width: 40.0 ; Full width of the comb (mm)
variable_comb_cycles_1: 4 ; Number of cycles in the first pass
variable_comb_cycles_2: 3 ; Number of zigzags in the second pass
variable_comb_offset_y: 1.0 ; Y offset for the second pass
variable_comb_zigzag_shift: 1.5 ; X shift for each zigzag step
Return to specified position
variable_return_x: 100.0
variable_return_y: 20.0
gcode:
{% set half_width = comb_width / 2 %}
{% set zigzag_shift = comb_zigzag_shift %}
G90 ; Absolute coordinates
G1 Z{comb_z_lift} F3000 ; Lift nozzle before moving
G1 X{comb_x} Y{comb_y} F6000 ; Center of the comb
G1 Z{comb_z} F3000 ; Contact with the comb
; First straight pass
G91 ; Relative coordinates
{% for i in range(comb_cycles_1) %}
G1 X{half_width} F4500
G1 X-{half_width * 2} F4500
G1 X{half_width} F4500
{% endfor %}
; Lift slightly and move Y offset
G1 Z0.3 Y{comb_offset_y} F3000
; Second pass — zigzag along X with a slight shift
{% for i in range(comb_cycles_2) %}
G1 X{half_width + (zigzag_shift * i)} F4500
G1 X-{(half_width + (zigzag_shift * i)) * 2} F4500
G1 X{half_width + (zigzag_shift * i)} F4500
{% endfor %}
; Lift and return
G90
G1 Z{comb_z_lift} F3000
G1 X{return_x} Y{return_y} F6000
G4 P500</code></pre><p></p>