1 / 6
Ikea Fredde - Oval tube monitor mount — image 1
1 / 6

Ikea Fredde - Oval tube monitor mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ikea Fredde - Oval tube monitor mount

Rating
0 / 5
Likes
7
Downloads
16
Makes
0
Views
318
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Have a nice day, everyone!
For a long time, I had two 24" monitors on my Fredde, but for personal reasons I decided to try a large flat 40" 32:9 panel to replace them.
Unfortunately, the Fredde doesn’t have enough room for such a big screen — at least not for me.
I tried using a classic monitor arm with a gas lift, but with it, the monitor was still too close.
My last option was to drill the wall for a monitor mount, but that felt too extreme.
After doing a bit of research, I found that I could use two oval 30x15 wardrobe tubes for this purpose.
A couple of days of modeling and printing later and look - I made my own mount.

With this mount, the screen surface is placed just a little bit behind the table's shelf.
It gives 80 to 100 cm of distance to the monitor, depending on your sitting posture.
You can adjust the distance by changing the depth of the 'MountCornerBot' part.

This mount was originally made for the Inncon 40C1R, but you can use it for anything you want.
You just need to adapt the 'OrigMountAdapter' part, depending on your personal needs.

In my case, the monitor weighs a bit under 9 kg, so I printed the parts with 50% infill and 2 mm walls/top/bottom to make them robust.
Below is a list of parts and fasteners I needed for the mount assembly.

Parts, fasteners and Assembly

See pictures and part names two understand what I'm talking about.
To mount tubes you need:

  • 2 oval 30x15 tubes ~1365mm

  • 4 complects of 'MountTableRingFull'

  • each complect consist from 'MountTableRing', 'MountTableRingPart' and 'MountCornerBot'

  • drill tubes using from 3.5 to 4 drill to secure tubes from falling apart (M3 bolt, index 3)

  • for each complect you need:

    1. DIN 912 M4x30 bolt (x2) - index 1

    2. DIN 912 M4x25 bolt (x2) - index 2

    3. DIN 912 M3x10 bolt (x1) - index 3

    4. DIN 934 M3 nut (x1) - index 4

    5. DIN 934 M4 nut (x4) - index 5

  • overall you need:

    1. DIN 912 M4x30 bolt (x8)

    2. DIN 912 M4x25 bolt (x8)

    3. DIN 912 M3x10 bolt (x1)

    4. DIN 934 M3 nut (x1)

    5. DIN 934 M4 nut (x16)

To mount monitor you need 'MonitorCenralFull' and metal plate from original monitor leg:

  • 'MonitorCenralFull' consist form 2 'MoutMain' and 'OrigMountAdapter'

  • for assembly you need:

    1. DIN 912 M4x16 bolt (x8) - index 6

    2. DIN 7991 M4x30 bolt (x4) - index 7

    3. DIN 934 M4 nut (x12) - index 8

Tags