Altoids tin insert + bolt-on external hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Altoids tin insert + bolt-on external hinge
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 15
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
INCLUDED FILES
🔩 Minimal external hinge
A simple, clean hinge for users who want to keep the original look of the tin and improve the lifetime of the tin
Printing recommendations
🧪 Recommended material: PETG
Provides better durability and flexibility for the hinge compared to PLA.
🧱 Supports:
Hinge model require supports when printed vertically with the hinge on the t.
⚠ It is not recommended to place supports near the inner walls, as this may cause failures on the inner corners.
👉 This reference is viewed from the bottom of the model.
Hardware & assembly
🔧 Designed for M3 × 6 mm screws Buy M3 Screws Kit Here
🔩 Use M3 nuts for a stronger and more reliable assembly
All holes are sized specifically for this hardware
🛠 Tin preparation:
It is recommended to create the holes in the Altoids tin using a center punch, just enough for the screws to pass through to the other side without deforming the metal.