1 / 7
Bosch GO 3 vertical holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical Bosch GO3 holder
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
I made a stand for a BOSCH GO 3 electric screwdriver so it can stay in a vertical position.
There are 3 versions available: one only for the GO 3, another for the GO 3 with a standard bit inserted, and a third version for the GO 3 with a 5.7 mm long bit inserted.
If the tolerances are too tight, you can adjust them in the slicer by increasing X and Y by 0.2 mm, which should be sufficient.