Spiral Fidget Toy Pyramid
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.77 – €0.94 net (excluding VAT)
For file: RP Spiral Pyramid main_0.4n_0.2mm_PLA_COREONEL_47m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.85 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 47.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Discover the mesmerizing world of spiral fidgets, perfect for calming your mind and keeping your hands busy. These sleek
- Rating
- 4 / 5
- Likes
- 32
- Downloads
- 592
- Makes
- 2
- Views
- 1,510
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Dive into the mesmerizing geometry of this Spiral Pyramid Fidget, designed to anchor your focus and satisfy your senses. Featuring deep, organic striations that wrap seamlessly around a sharp tetrahedral base, this artifact offers a unique tactile experience that is impossible to put down. Perfect for your desk setup or as a pocket carry, its high-contrast design turns a simple stress reliever into a piece of modern functional art. Whether you need to channel restless energy or simply appreciate clean lines, this print is ready to elevate your workspace.
Print Guide 🖨
This model is designed to be an easy, stress-free print. Here are the recommended settings for the best results:
🧱 Filament: PLA is highly recommended for crisp details and a clean finish. (PETG or ABS work too if preferred).
💪 Infill: 15% - 20% (Grid or Gyroid pattern). This provides a nice weight and durability while keeping the print lightweight.
🚫 Supports: None required. The angles are optimized to print perfectly without any support material.
📏 Layer Height: 0.20mm (Standard) for a smooth finish, or 0.16mm if you want the layer lines to be nearly invisible.
🐢 Print Speed: Standard profiles (50-60 mm/s for outer walls) work great to ensure the curves remain sharp.
💡 Color Tip: For the two-tone look seen in the renders, simply swap filaments at the specific layer height where the grooves begin, or use an AMS/MMU system if available.