1 / 4
Filament feedthrough for PC4-M10 - L44mm-D6mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament feedthrough for 2xPC4-M10 connector 44mm length between nuts Drill a 6mm hole
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I needed to side-load my Ikea Lack enclosure, which I made higher for my MMU using an 44x66mm piece of wood.
Wanted a PTFE tube connector M10PC4 on 2 sides, and no issues with loading; so the rod/axis sticks out a bit to guide the filament (1,75) all the way to the hole of the metal connector.
Creating a different length? Make sure you have 6mm of M6x1 thread on both sides and the hole is around 2.4mm.