3.5 HDD Trays for Sagittarius NAS case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tray for 3.5 mm hard drives, more handy than the original Sagittarius handles.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 21
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Tray and handle are printed from PETG. Models require supports. Automatic or custom supports can be used. To use custom supports, import the main STL file into the slicer with the STL file for the supports as a single model of parts.
Trays should be printed vertically.
handle.stl and tray.stl print settings:
Arachne wall generation
wall loops - 4
top layer - 4
bottom layer - 4
infil - 25% cubic
support_handle.stl and support_tray
wall loops - 1
top layer - 2
bottom layer - 2
infil - 5% lightning
Assembly
After printing, carefully remove the supports.
Snap handle to tray
Loosen the mechanism by clicking the handle on and off a couple of times.
Secure the hard drive with the screws that hold the original handles from the kit in place through the bottom frame.
Insert the screws from the kit into the anti-vibration bushings and screw them into the sides.
