1 / 5
C13 PSU to USB-C PD conversion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert a network switch from C19 to USB PD
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
My Zyxel GS1100-16 stopped powering on. On further investigation I found that the integrated PSU's caps has bulged and stopped working. I didn't have any spare capacitors on hand so I ended up converting it to USB C PD. Since it only needs 12v .5A, I figured I could use my USB power supply (100w PD) I've installed in the back of my rack for powering some of my Raspberry Pis.
Items used:
Make sure you solder the pads that correspond to 12v.
I filled the cavity with hot glue to hold the board in and insulate it. Resin might be a good choice as well.