1 / 1
Tube Squeezer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Couldn't find any good tube squeezers so made my own. Works very well as long as you can get the thread to print.
- Rating
- 4.889 / 5
- Likes
- 68
- Downloads
- 716
- Makes
- 10
- Views
- 3,005
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
To use line up the slot on the shell and nut and slide the end of a tube so the end slightly sticks out of the bolt. Then untighten the nut, slide the bolt out about 1 mm and rotate it to squeeze the tube. To lock it in place slide the bolt back in and tighten the nut.
If your printer isn't super dialed in threads might be an issue. Threads might be rough off the printer but after some use they get smooth.
Edit: Rounded the corners on the shell to make it stronger.
Happy printing!