Turris 1.0 Router Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for the Turris 1.0 network router. It has added holes for 2 more antennas and extra ventilation.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Printing the model:
The model should be positioned with its biggest plane touching the build plate (as shown in the image below), and, by my own experience printing it, I recommend slowing down the
printer from 6 mm and upwards for the walls to not warp.
Orienting the model:
About the model:
This cover is made for the Turris 1.0 wifi router made by the Czech company cz.nic. It is made so if you install another wifi card, you have the place to put the antennas.
After printing:
After you finish the print, there are no supports that need to be removed, install the antennas in the holes (be careful to not over tighten them) and use the original screws to screw it back together with the rest of the router.
Warning:
This model has only been tested with the Turris 1.0, it has not been tested with the 1.1 so I cannot tell if it fits. It is not compatible with other Turris routers like the Omnia.