1 / 7
PM5/PM4/PM3 Mount for Concept 2 Model B Rowing Machine
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount that can very easily allow you to mount a PM5, PM4, or PM3 monitor to an older Model B erg.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This mount is amazing for mounting a PM5 onto a Model B erg. All the hardware required is the original two screws that attached the older Monitor onto the erg, and the large bolt for the monitor. The mount will just pop into place, like the older PM mount, and the screws go through the holes. Make sure that the holes are under the wire to secure it down properly. The PM5 gets pushed down into the bracket and the bolt is passed through, with the nut holding it secure.