1 / 2
Celing mounted shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a simple ceiling mounted shelf, to hold my projector up. I designed it to fit a 200x18mm plank
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 88
- Makes
- 0
- Views
- 572
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed it to fit a 200x18mm plank
Printed in yellow r-PETG from ReFlow, using a 1mm nozzle, 0.8mm layer height for the looks, though can be done with a much smaller nozzle/layer height.
There is a space for up to 18mm diameter washers, to help hold it up and spread the weight.
No supports required, if the flats face the bed surface.
It's a pretty large print, at 189x222mm, so might not fit on all bed sizes.