XReal One Pro Nose Pads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nose pads for the XReal One / Pro
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted some longer nose pads for my XReal One Pro so I decided to give it a shot.
Printing Instructions
Printer must be able to deliver proper print accuracy due to the small gaps required.
Suprisingly I used PETG for my prints and it felt fine, didn't need to use TPU.
Pole
Print this straight up, brim it if you have adhesion problems.
The 20mm length is about double of the L size nose tip in the XReal One Box
Scale it by it's length to get your desired length.
Nose pads
Print with the hole side facing up.
Mirror on X-Axis for alternate side
Assembly
Put the pole into the hole of a nose pad
If it's too loose, use some loose adhesive to stick it. That's why you should have a good supply of "sticky stuff, blu tack" handy as a 3D printer owner
Insert the pole into the nose pad arm of the glasses.
Push it until where the arm bends can provide a more secure fit.
Due to how the arm seems to be a folded piece of metal, the fit could be a bit loose.. once again.. "blu tack!"