The Adjustable Brachyrack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
=====================================
The Adjustable BrachyRack v201/2026
=====================================
Bar adjusts from about 4.25" to 6" tall and 4.25" wide to 7".
-------------------------------------------
Suggested Print Settings (nothing special)
-------------------------------------------
Tested with PETG and PLA+
15% Gyroid Infill
4 walls
.20 Layer Height
Print adjustable legs and leg extension bits flat on the bed with supports enabled (will need to clean supports out of channel for extension) or print vertically without supports.
Print resting bar and extension bar vertically.
-------------------------------------------