PB Pistol/Masterkey
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use a spare xshot longshot pt, some m3 nuts/screw, and k25 to make a silly shell pistol or masterkey
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 17
- Makes
- 0
- Views
- 238
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The xshot longshot has a huge pt that you usually replace. The PBR bow is very cheap on hardware, although inconsistent with the PBR action. Added a catch and the option of a picatinny mount or pistol grip to make it a compact but powerful silly shell blaster.
Hardware:
Xshot longshot PT + pair of orings (aftermarket metal ones work if you don't have one lying around)
016 o ring for the shell carriage.
12 m3x8 for the front plates
6 m3x10 screws for the catch block
m3x35 screw for the plunger head
2 m3 nuts
catch spring under 5mm id, over 4mm id, at least 10mm long
at least 140mm of k25 (max ~15 coils if you don't shift the catch notch backwards)
Pistol Specific Hardware:
m3x20 pin (you can also just print one or use a screw)
8 m3x8 screws for the grip
(optional) m3x16 or longer screw for the ejector
(optional) small spring for the ejector (same as whatever the wildstyle takes, but can accommodate a variety)
Masterkey Specific Hardware:
3 m3x30 screws
3 m3 nuts
Other things to consider:
Use the stock bow arm grip from the PBR bow if this one is too short
widen the catch button on the masterkey as you'd like to make it easier for you to hit as long as you don't change the print orientation
pairs of m3x8 screws could be replaced with one screw slightly longer than their combined length + a nut