Super Drum 34/45/70 angled talon neck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I really wanted a badass drum mag for my phoenix
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 67
- Makes
- 0
- Views
- 494
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The assembly process is practically the same, just put one angled dummy as the first one and other 6 dummies should be the standard ones. From my tests the 34 round version feeds very reliably in my worker phoenix 2.0 on max rate of fire, but only if you use 4 drum springs or more. 3 are ok for smaller rates of fire. For the bigger drums I'd recommend even more springs (at least if the fire rate of your blaster is higher than 7-9 darts per second). Idk about the 45 rnd one, but for the 70 dart version 4 springs isn't enough for the phoenix.
Tested with super drum 34 and 70
Also be aware that I tightened the tolerances so the neck doesn't wobble in the place where it connects to the drum itself (it was causing feeding issues).
Might add a shorter version in the future and also versions with proper markings for 45 and 70 round drums.