Clip-Together Display Frame for Clay Imprints (110×110 mm) – Reversible, Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip-together frame for 110×110 mm clay imprints. No glue on clay, wall-mount ready for hands, feet, or paws.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a two-piece clip-together display frame designed to showcase clay imprints (hands, feet, or paws) while keeping the clay accessible and protected over time.
The frame is specifically sized to sandwich a 110 × 110 mm clay tile with approximately 5 mm thickness, holding it securely between the two printed parts without any glue on the clay itself. This allows you to remove or adjust the clay later, avoiding deterioration or permanent bonding.
A small top slot is integrated into the design to accept a brass hanging hook, allowing for easy wall mounting.
The hook is glued into the frame, not into the clay (lightly scoring the brass hook improves adhesion).
Ideal For
Infant hand or foot imprints
Pet paw prints
Memorial or keepsake clay impressions
Dimensions & Compatibility
Clay size: 110 × 110 mm
Clay thickness: ≈ 5 mm (slight tolerance built in)
Recommended Hardware
Brass hanging hook:
https://www.amazon.fr/dp/B0CGC9S98D