Threading Needle to thread a belt or rope.
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.29 – €0.36 net (excluding VAT)
For file: Einfaedelnadel-Cut002_0.4n_0.2mm_PETG_MK4SMMU3_15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.32 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 15 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Threading Needle to supporting threading a rope or belt.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 29
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Threading Needle to supporting threading a rope or belt.
I needed this threading needle to thread my Judo belt/rope into the Judo pants.
Settings | Value |
|---|---|
Infill | 10% (adaptive cubic) |
Perimeters | 2 |
Layer Height | 0.20 mm Speed |
Material | PETG / PLA |
Supporting Material | organic |
Comments | |
Ironing | no (not needed, but creates a cleaner surface) |
Feedback is welcome.
Share your makes!