FDM PiP Trains Replacement Hooks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Now you can replace the hooks on your FDM Print in Place train cars without printing the entire car!
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Standard Digital File License
If your little one (or you) have gotten a little to rough with your FDM Train cars and broken off the hook, now you can repair it instead of printing a whole new car.
Print one hook and one pin for each repair.
Good bed adhesion is required, especially for the pins, so a clean build plate, or a little adhesion helper is recommended.
Sample shown printed in PolyMaker Black PLA at 0.2mm layer height and 15% gyroid infill with 2 walls and 5 top and 3 bottom layers.
Presliced MK4 files are provided
Prusa Slicer and Bambu Studio projects provided.