Benchy Multicolor Torture Test
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.77 – €13.16 net (excluding VAT)
For file: NewTortureBenchy_0.4n_0.2mm_PLA,PLA,PLA,PLA,PLA_MK4ISMMU3_12h34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.96 excluding VAT (range midpoint).
- Weight reported by the author
- 137 g
- Print time reported by the author
- 12.57 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
MMU? AMS? Does it work well? You will very quickly find out
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 67
- Makes
- 0
- Views
- 299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
I wanted to make a model that would be small and easy to find, but also allowing me to test and fine tune my MMU, hence the multi hour benchy!
I printed this in a mix of inland and hatchbox PLA, and it took me close to 17 hours to print this whole model.
I do not have the same model, in STL form, in my pictures, but I have uploaded a very similarly painted benchy that you can print, in a GCode!
I have also uploaded the same file in my attached pictures, but I do not have the STL/3MF, only GCode!
Please post your makes and leave a review if you get a chance :)